Die-dending of adhesively bonded sheet metals

Michihiro Takiguchi; Taro Tokuda; Tetsuya Yoshida; Takeshi Uemori; Fusahito Yoshida

doi:10.4028/www.scientific.net/KEM.626.103

Die-dending of adhesively bonded sheet metals

Michihiro Takiguchi, Taro Tokuda, Tetsuya Yoshida, Takeshi Uemori, Fusahito Yoshida

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

Abstract

In this paper, the deformation behavior of adhesive layer in die-Bending for adhesively bonded sheet metals was investigated by experiments and finite element method (FEM). We paid special attention to the bending/unbending shear deformation of the adhesive layer during the die-Bending of adhesively bonded sheet metals by using highly ductile acrylic adhesive. Major results obtained are summarized as follows: (1) The bending/unbending shear deformation of the adhesive layer was observed during the die-Bending. (2) The punch radius has a large influence on the die-Bending in the adhesively bonded sheet metals. (3) It is desirable to perform die-Bending at high speed as well as air-Bending.

Original language	English
Title of host publication	Advances in Engineering Plasticity XII
Publisher	Trans Tech Publications Ltd
Pages	103-108
Number of pages	6
ISBN (Print)	9783038352266
DOIs	https://doi.org/10.4028/www.scientific.net/KEM.626.103
Publication status	Published - 2015
Externally published	Yes
Event	12th Asia-Pacific Conference on Engineering Plasticity and Its Application, AEPA 2014 - Kaohsiung, Taiwan, Province of China Duration: Sep 1 2014 → Sep 5 2014

Publication series

Name	Key Engineering Materials
Volume	626
ISSN (Print)	1013-9826
ISSN (Electronic)	1662-9795

Other

Other	12th Asia-Pacific Conference on Engineering Plasticity and Its Application, AEPA 2014
Country/Territory	Taiwan, Province of China
City	Kaohsiung
Period	9/1/14 → 9/5/14

Keywords

Adhesive Joints
Die-Bending
FEM
Highly Ductile Adhesive
Plastic Working

ASJC Scopus subject areas

Materials Science(all)
Mechanics of Materials
Mechanical Engineering

Access to Document

10.4028/www.scientific.net/KEM.626.103

Cite this

Takiguchi, M, Tokuda, T, Yoshida, T, Uemori, T & Yoshida, F 2015, Die-dending of adhesively bonded sheet metals. in Advances in Engineering Plasticity XII. Key Engineering Materials, vol. 626, Trans Tech Publications Ltd, pp. 103-108, 12th Asia-Pacific Conference on Engineering Plasticity and Its Application, AEPA 2014, Kaohsiung, Taiwan, Province of China, 9/1/14. https://doi.org/10.4028/www.scientific.net/KEM.626.103

@inproceedings{9cea6680673940f9bf7860bed6eca175,

title = "Die-dending of adhesively bonded sheet metals",

abstract = "In this paper, the deformation behavior of adhesive layer in die-Bending for adhesively bonded sheet metals was investigated by experiments and finite element method (FEM). We paid special attention to the bending/unbending shear deformation of the adhesive layer during the die-Bending of adhesively bonded sheet metals by using highly ductile acrylic adhesive. Major results obtained are summarized as follows: (1) The bending/unbending shear deformation of the adhesive layer was observed during the die-Bending. (2) The punch radius has a large influence on the die-Bending in the adhesively bonded sheet metals. (3) It is desirable to perform die-Bending at high speed as well as air-Bending.",

keywords = "Adhesive Joints, Die-Bending, FEM, Highly Ductile Adhesive, Plastic Working",

author = "Michihiro Takiguchi and Taro Tokuda and Tetsuya Yoshida and Takeshi Uemori and Fusahito Yoshida",

note = "Copyright: Copyright 2020 Elsevier B.V., All rights reserved.; 12th Asia-Pacific Conference on Engineering Plasticity and Its Application, AEPA 2014 ; Conference date: 01-09-2014 Through 05-09-2014",

year = "2015",

doi = "10.4028/www.scientific.net/KEM.626.103",

language = "English",

isbn = "9783038352266",

series = "Key Engineering Materials",

publisher = "Trans Tech Publications Ltd",

pages = "103--108",

booktitle = "Advances in Engineering Plasticity XII",

}

TY - GEN

T1 - Die-dending of adhesively bonded sheet metals

AU - Takiguchi, Michihiro

AU - Tokuda, Taro

AU - Yoshida, Tetsuya

AU - Uemori, Takeshi

AU - Yoshida, Fusahito

PY - 2015

Y1 - 2015

N2 - In this paper, the deformation behavior of adhesive layer in die-Bending for adhesively bonded sheet metals was investigated by experiments and finite element method (FEM). We paid special attention to the bending/unbending shear deformation of the adhesive layer during the die-Bending of adhesively bonded sheet metals by using highly ductile acrylic adhesive. Major results obtained are summarized as follows: (1) The bending/unbending shear deformation of the adhesive layer was observed during the die-Bending. (2) The punch radius has a large influence on the die-Bending in the adhesively bonded sheet metals. (3) It is desirable to perform die-Bending at high speed as well as air-Bending.

AB - In this paper, the deformation behavior of adhesive layer in die-Bending for adhesively bonded sheet metals was investigated by experiments and finite element method (FEM). We paid special attention to the bending/unbending shear deformation of the adhesive layer during the die-Bending of adhesively bonded sheet metals by using highly ductile acrylic adhesive. Major results obtained are summarized as follows: (1) The bending/unbending shear deformation of the adhesive layer was observed during the die-Bending. (2) The punch radius has a large influence on the die-Bending in the adhesively bonded sheet metals. (3) It is desirable to perform die-Bending at high speed as well as air-Bending.

KW - Adhesive Joints

KW - Die-Bending

KW - FEM

KW - Highly Ductile Adhesive

KW - Plastic Working

UR - http://www.scopus.com/inward/record.url?scp=84907080683&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84907080683&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/KEM.626.103

DO - 10.4028/www.scientific.net/KEM.626.103

M3 - Conference contribution

AN - SCOPUS:84907080683

SN - 9783038352266

T3 - Key Engineering Materials

SP - 103

EP - 108

BT - Advances in Engineering Plasticity XII

PB - Trans Tech Publications Ltd

T2 - 12th Asia-Pacific Conference on Engineering Plasticity and Its Application, AEPA 2014

Y2 - 1 September 2014 through 5 September 2014

ER -

Die-dending of adhesively bonded sheet metals

Abstract

Publication series

Other

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this