Development of thickener-modeled dry dense medium separator for high-speed and low-maintenance separation

Mikio Yoshida, Takafumi Shiraishi, Kenta Okamoto, Jun Oshitani, Kuniaki Gotoh

Research output: Contribution to journalArticle

Abstract

A thickener-modeled dry dense medium separator using a gas-solid fluidized bed was developed in which materials of different specific gravity float or sink in the bed and can be withdrawn by overflow or underflow. This system is expected to allow high-speed separation and low-maintenance operation compared with a conventional dry dense medium separator, because there are no moving parts for withdrawing floats and sinks from the bed. The effects of overflow/underflow rate and sample feed rate on the performance of the separator were investigated using silica sand as a fluidized bed medium and 20-mm diameter spheres of various specific gravities as samples for separation. It was found that when the overflow/underflow rate was 0.44 or less, the float-sink boundary was smaller than when there was no overflow and no underflow, but float-sink sharpness was maintained. On the other hand, when the overflow/underflow rate was 0.64 or more, the float-sink boundary was similar to that in the case of no flow, but separation sharpness deteriorated. Furthermore, when the overflow/underflow rate was 0.44 and the feeding rate was 0.035 kg/s (=2.2 m3-object/(m2·h): volume-based separation speed per fluidized bed area) or less, Newton effciencies were more than 0.9. Compared with conventional apparatus, the separation speed of the present apparatus was 3.4 times higher. Hence, this withdrawing system can be valuable for increasing separation speed and reducing the need for maintenance.

Original languageEnglish
Pages (from-to)178-183
Number of pages6
JournalKagaku Kogaku Ronbunshu
Volume39
Issue number3
DOIs
Publication statusPublished - May 2013

Fingerprint

Separators
Fluidized beds
Density (specific gravity)
Silica sand
Flow separation
Gases

Keywords

  • A gas-solid fluidized bed
  • Dry dense medium separator
  • High-speed separation
  • Low-maintenance
  • Particle flow

ASJC Scopus subject areas

  • Chemical Engineering(all)
  • Chemistry(all)

Cite this

Development of thickener-modeled dry dense medium separator for high-speed and low-maintenance separation. / Yoshida, Mikio; Shiraishi, Takafumi; Okamoto, Kenta; Oshitani, Jun; Gotoh, Kuniaki.

In: Kagaku Kogaku Ronbunshu, Vol. 39, No. 3, 05.2013, p. 178-183.

Research output: Contribution to journalArticle

Yoshida, Mikio ; Shiraishi, Takafumi ; Okamoto, Kenta ; Oshitani, Jun ; Gotoh, Kuniaki. / Development of thickener-modeled dry dense medium separator for high-speed and low-maintenance separation. In: Kagaku Kogaku Ronbunshu. 2013 ; Vol. 39, No. 3. pp. 178-183.
@article{dcc0bb816e8f48edae9379a84831d323,
title = "Development of thickener-modeled dry dense medium separator for high-speed and low-maintenance separation",
abstract = "A thickener-modeled dry dense medium separator using a gas-solid fluidized bed was developed in which materials of different specific gravity float or sink in the bed and can be withdrawn by overflow or underflow. This system is expected to allow high-speed separation and low-maintenance operation compared with a conventional dry dense medium separator, because there are no moving parts for withdrawing floats and sinks from the bed. The effects of overflow/underflow rate and sample feed rate on the performance of the separator were investigated using silica sand as a fluidized bed medium and 20-mm diameter spheres of various specific gravities as samples for separation. It was found that when the overflow/underflow rate was 0.44 or less, the float-sink boundary was smaller than when there was no overflow and no underflow, but float-sink sharpness was maintained. On the other hand, when the overflow/underflow rate was 0.64 or more, the float-sink boundary was similar to that in the case of no flow, but separation sharpness deteriorated. Furthermore, when the overflow/underflow rate was 0.44 and the feeding rate was 0.035 kg/s (=2.2 m3-object/(m2·h): volume-based separation speed per fluidized bed area) or less, Newton effciencies were more than 0.9. Compared with conventional apparatus, the separation speed of the present apparatus was 3.4 times higher. Hence, this withdrawing system can be valuable for increasing separation speed and reducing the need for maintenance.",
keywords = "A gas-solid fluidized bed, Dry dense medium separator, High-speed separation, Low-maintenance, Particle flow",
author = "Mikio Yoshida and Takafumi Shiraishi and Kenta Okamoto and Jun Oshitani and Kuniaki Gotoh",
year = "2013",
month = "5",
doi = "10.1252/kakoronbunshu.39.178",
language = "English",
volume = "39",
pages = "178--183",
journal = "Kagaku Kogaku Ronbunshu",
issn = "0386-216X",
publisher = "Society of Chemical Engineers, Japan",
number = "3",

}

TY - JOUR

T1 - Development of thickener-modeled dry dense medium separator for high-speed and low-maintenance separation

AU - Yoshida, Mikio

AU - Shiraishi, Takafumi

AU - Okamoto, Kenta

AU - Oshitani, Jun

AU - Gotoh, Kuniaki

PY - 2013/5

Y1 - 2013/5

N2 - A thickener-modeled dry dense medium separator using a gas-solid fluidized bed was developed in which materials of different specific gravity float or sink in the bed and can be withdrawn by overflow or underflow. This system is expected to allow high-speed separation and low-maintenance operation compared with a conventional dry dense medium separator, because there are no moving parts for withdrawing floats and sinks from the bed. The effects of overflow/underflow rate and sample feed rate on the performance of the separator were investigated using silica sand as a fluidized bed medium and 20-mm diameter spheres of various specific gravities as samples for separation. It was found that when the overflow/underflow rate was 0.44 or less, the float-sink boundary was smaller than when there was no overflow and no underflow, but float-sink sharpness was maintained. On the other hand, when the overflow/underflow rate was 0.64 or more, the float-sink boundary was similar to that in the case of no flow, but separation sharpness deteriorated. Furthermore, when the overflow/underflow rate was 0.44 and the feeding rate was 0.035 kg/s (=2.2 m3-object/(m2·h): volume-based separation speed per fluidized bed area) or less, Newton effciencies were more than 0.9. Compared with conventional apparatus, the separation speed of the present apparatus was 3.4 times higher. Hence, this withdrawing system can be valuable for increasing separation speed and reducing the need for maintenance.

AB - A thickener-modeled dry dense medium separator using a gas-solid fluidized bed was developed in which materials of different specific gravity float or sink in the bed and can be withdrawn by overflow or underflow. This system is expected to allow high-speed separation and low-maintenance operation compared with a conventional dry dense medium separator, because there are no moving parts for withdrawing floats and sinks from the bed. The effects of overflow/underflow rate and sample feed rate on the performance of the separator were investigated using silica sand as a fluidized bed medium and 20-mm diameter spheres of various specific gravities as samples for separation. It was found that when the overflow/underflow rate was 0.44 or less, the float-sink boundary was smaller than when there was no overflow and no underflow, but float-sink sharpness was maintained. On the other hand, when the overflow/underflow rate was 0.64 or more, the float-sink boundary was similar to that in the case of no flow, but separation sharpness deteriorated. Furthermore, when the overflow/underflow rate was 0.44 and the feeding rate was 0.035 kg/s (=2.2 m3-object/(m2·h): volume-based separation speed per fluidized bed area) or less, Newton effciencies were more than 0.9. Compared with conventional apparatus, the separation speed of the present apparatus was 3.4 times higher. Hence, this withdrawing system can be valuable for increasing separation speed and reducing the need for maintenance.

KW - A gas-solid fluidized bed

KW - Dry dense medium separator

KW - High-speed separation

KW - Low-maintenance

KW - Particle flow

UR - http://www.scopus.com/inward/record.url?scp=84878098966&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84878098966&partnerID=8YFLogxK

U2 - 10.1252/kakoronbunshu.39.178

DO - 10.1252/kakoronbunshu.39.178

M3 - Article

VL - 39

SP - 178

EP - 183

JO - Kagaku Kogaku Ronbunshu

JF - Kagaku Kogaku Ronbunshu

SN - 0386-216X

IS - 3

ER -