Development of the Electricity Rust Preventive Machining Method in Surface Grinding

S. Tsukamoto, N. Nishikawa, K. Okamoto, Kazuhito Oohashi

Research output: Contribution to journalArticle

9 Citations (Scopus)

Abstract

In this paper, the electricity rust preventive machining method has been developed to perfectly prevent the rust of workpiece using only the water in the surface grinding. The surface grinding can be performed under the condition of rust prevention, in which a negligible current is applied between the workpiece, connected with the cathode, and the cooling water, connected with the anode. This method can be an ultimate zero emission ecology machining, because only the water is used as the working fluid without the extreme pressure additive, the mineral oil, and the surface active agent.

Original languageEnglish
Pages (from-to)483-488
Number of pages6
JournalKey Engineering Materials
Volume257-258
Publication statusPublished - 2004

Fingerprint

Machining
Electricity
Mineral Oil
Water
Mineral oils
Cooling water
Ecology
Surface-Active Agents
Anodes
Cathodes
Surface active agents
Fluids

Keywords

  • Ecology Machining
  • Electricity Rust Preventive Machining
  • Surface Grinding
  • Zero Emission

ASJC Scopus subject areas

  • Ceramics and Composites
  • Chemical Engineering (miscellaneous)

Cite this

Development of the Electricity Rust Preventive Machining Method in Surface Grinding. / Tsukamoto, S.; Nishikawa, N.; Okamoto, K.; Oohashi, Kazuhito.

In: Key Engineering Materials, Vol. 257-258, 2004, p. 483-488.

Research output: Contribution to journalArticle

Tsukamoto, S. ; Nishikawa, N. ; Okamoto, K. ; Oohashi, Kazuhito. / Development of the Electricity Rust Preventive Machining Method in Surface Grinding. In: Key Engineering Materials. 2004 ; Vol. 257-258. pp. 483-488.
@article{1cb2d572f3f44dc387afa394b39e401e,
title = "Development of the Electricity Rust Preventive Machining Method in Surface Grinding",
abstract = "In this paper, the electricity rust preventive machining method has been developed to perfectly prevent the rust of workpiece using only the water in the surface grinding. The surface grinding can be performed under the condition of rust prevention, in which a negligible current is applied between the workpiece, connected with the cathode, and the cooling water, connected with the anode. This method can be an ultimate zero emission ecology machining, because only the water is used as the working fluid without the extreme pressure additive, the mineral oil, and the surface active agent.",
keywords = "Ecology Machining, Electricity Rust Preventive Machining, Surface Grinding, Zero Emission",
author = "S. Tsukamoto and N. Nishikawa and K. Okamoto and Kazuhito Oohashi",
year = "2004",
language = "English",
volume = "257-258",
pages = "483--488",
journal = "Key Engineering Materials",
issn = "1013-9826",
publisher = "Trans Tech Publications",

}

TY - JOUR

T1 - Development of the Electricity Rust Preventive Machining Method in Surface Grinding

AU - Tsukamoto, S.

AU - Nishikawa, N.

AU - Okamoto, K.

AU - Oohashi, Kazuhito

PY - 2004

Y1 - 2004

N2 - In this paper, the electricity rust preventive machining method has been developed to perfectly prevent the rust of workpiece using only the water in the surface grinding. The surface grinding can be performed under the condition of rust prevention, in which a negligible current is applied between the workpiece, connected with the cathode, and the cooling water, connected with the anode. This method can be an ultimate zero emission ecology machining, because only the water is used as the working fluid without the extreme pressure additive, the mineral oil, and the surface active agent.

AB - In this paper, the electricity rust preventive machining method has been developed to perfectly prevent the rust of workpiece using only the water in the surface grinding. The surface grinding can be performed under the condition of rust prevention, in which a negligible current is applied between the workpiece, connected with the cathode, and the cooling water, connected with the anode. This method can be an ultimate zero emission ecology machining, because only the water is used as the working fluid without the extreme pressure additive, the mineral oil, and the surface active agent.

KW - Ecology Machining

KW - Electricity Rust Preventive Machining

KW - Surface Grinding

KW - Zero Emission

UR - http://www.scopus.com/inward/record.url?scp=17644433749&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=17644433749&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:17644433749

VL - 257-258

SP - 483

EP - 488

JO - Key Engineering Materials

JF - Key Engineering Materials

SN - 1013-9826

ER -