DEVELOPMENT OF HELICAL TUYERE FOR RAPID REFINING IN CONVERTER (DEVELOPMENT OF NEW TYPE TUYERE FOR BOTTOM BLOWN CONVERTER - 1).

Yasuo Kishimoto, Yoshiei Katou, Hideo Nakamura, Tetsuya Fujii, Yasuhiro Habu

Research output: Contribution to journalArticle

Abstract

This report presents an investigation of helical tuyeres for rapid refining. This enables a decrease in wear rate and spitting compared with a conventional tuyere. On the basis of a water model experiment, the helical tuyere was tested in a 5 t converter to determine its application to smelting reduction technology.

Original languageEnglish
JournalTransactions of the Iron and Steel Institute of Japan
Volume26
Issue number6
Publication statusPublished - 1985
Externally publishedYes

Fingerprint

Smelting
Refining
Wear of materials
Water
Experiments

ASJC Scopus subject areas

  • Engineering(all)

Cite this

DEVELOPMENT OF HELICAL TUYERE FOR RAPID REFINING IN CONVERTER (DEVELOPMENT OF NEW TYPE TUYERE FOR BOTTOM BLOWN CONVERTER - 1). / Kishimoto, Yasuo; Katou, Yoshiei; Nakamura, Hideo; Fujii, Tetsuya; Habu, Yasuhiro.

In: Transactions of the Iron and Steel Institute of Japan, Vol. 26, No. 6, 1985.

Research output: Contribution to journalArticle

@article{5a032e53ed974104aeb29529e86b26b4,
title = "DEVELOPMENT OF HELICAL TUYERE FOR RAPID REFINING IN CONVERTER (DEVELOPMENT OF NEW TYPE TUYERE FOR BOTTOM BLOWN CONVERTER - 1).",
abstract = "This report presents an investigation of helical tuyeres for rapid refining. This enables a decrease in wear rate and spitting compared with a conventional tuyere. On the basis of a water model experiment, the helical tuyere was tested in a 5 t converter to determine its application to smelting reduction technology.",
author = "Yasuo Kishimoto and Yoshiei Katou and Hideo Nakamura and Tetsuya Fujii and Yasuhiro Habu",
year = "1985",
language = "English",
volume = "26",
journal = "ISIJ International",
issn = "0915-1559",
publisher = "Iron and Steel Institute of Japan",
number = "6",

}

TY - JOUR

T1 - DEVELOPMENT OF HELICAL TUYERE FOR RAPID REFINING IN CONVERTER (DEVELOPMENT OF NEW TYPE TUYERE FOR BOTTOM BLOWN CONVERTER - 1).

AU - Kishimoto, Yasuo

AU - Katou, Yoshiei

AU - Nakamura, Hideo

AU - Fujii, Tetsuya

AU - Habu, Yasuhiro

PY - 1985

Y1 - 1985

N2 - This report presents an investigation of helical tuyeres for rapid refining. This enables a decrease in wear rate and spitting compared with a conventional tuyere. On the basis of a water model experiment, the helical tuyere was tested in a 5 t converter to determine its application to smelting reduction technology.

AB - This report presents an investigation of helical tuyeres for rapid refining. This enables a decrease in wear rate and spitting compared with a conventional tuyere. On the basis of a water model experiment, the helical tuyere was tested in a 5 t converter to determine its application to smelting reduction technology.

UR - http://www.scopus.com/inward/record.url?scp=0022321110&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0022321110&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0022321110

VL - 26

JO - ISIJ International

JF - ISIJ International

SN - 0915-1559

IS - 6

ER -