Development of electric rust preventive machining method in cylindrical grinding

Naohiro Nishikawa, Kazuhito Ohashi, Shinya Tsukamoto, Toshikatsu Nakajima

Research output: Contribution to conferencePaper

Abstract

The electricity rust preventive machining method is proposed to effective prevents the workpiece from rusting in the cylindrical grinding only with water. The workpiece as a cathode is protected from rusting by supplying the electric current through the water. This method leads to the ecology machining because the water without extreme pressure agents, mineral oils and so on included in conventional machining fluid. Therefore, this method saves much work in a treatment of stale machining fluid. In this paper, the electric rust preventive machining method is developed and investigated its application to cylindrical grinding.

Original languageEnglish
Pages653-658
Number of pages6
Publication statusPublished - Dec 1 2005
Event3rd International Conference on Leading Edge Manufacturing in 21st Century, LEM 2005 - Nagoya, Japan
Duration: Oct 19 2005Oct 22 2005

Other

Other3rd International Conference on Leading Edge Manufacturing in 21st Century, LEM 2005
CountryJapan
CityNagoya
Period10/19/0510/22/05

    Fingerprint

Keywords

  • Cathodic protection
  • Cylindrical grinding
  • Effluent treatment
  • Electric rust preventive machining
  • Grinding fluid
  • Zero emission machining

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering

Cite this

Nishikawa, N., Ohashi, K., Tsukamoto, S., & Nakajima, T. (2005). Development of electric rust preventive machining method in cylindrical grinding. 653-658. Paper presented at 3rd International Conference on Leading Edge Manufacturing in 21st Century, LEM 2005, Nagoya, Japan.