Development of degaussing system of magnetic filters for high gradient magnetic separation to improve recovery ratio of trapped magnetic Nanobeads

Kazuhiro Kajikawa, Hiroshi Ueda, Yasuharu Kamioka, Koh Agatsuma, Shuichiro Fuchino, Mitsuho Furuse, Tomohiro Iitsuka, Shuichi Nakamura

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

We have successfully developed a high-gradient magnetic separation system for medical proteins using affinity magnetic nanobeads. Our system shows very high separation efficiency and can also be expected to realize lower cost due to larger production rate compared to the conventional system. The developed system consists of a 3-T superconducting magnet and a filter made of fine magnetic metal fibers. The superconducting magnet is wound with a NbTi twisted multifilamentary wire, and cooled by a 4-K Gifford-McMahon cryocooler. In order to achieve high recovery ratio of the magnetic nanobeads trapped on the filter located in a room-temperature clear bore of the cryostat, the ac degaussing system for the filter is fabricated using an inductance-capacitance resonance circuit composed of a series connection with the superconducting magnet and an additional capacitor. To perform the inductance-capacitance resonance more than a few cycles between superconducting magnet and capacitor, the superconducting magnet has a slit in the bobbin to prevent an eddy current coupled with an alternating magnetic field. It also has a control system for a high-speed switching circuit. This magnet can successfully generate a magnetic field of 3.0 T in the clear bore of the cryostat with a diameter of 30 mm in a relatively fast sweep time of 150 s due to the slit in the magnet bobbin. Using our degaussing system, a high recovery ratio of the nanobeads in pure water has been performed about 94.1%.

Original languageEnglish
Article number6595624
JournalIEEE Transactions on Applied Superconductivity
Volume24
Issue number3
DOIs
Publication statusPublished - 2014
Externally publishedYes

Fingerprint

Degaussing
Magnetic filters
Magnetic separation
Superconducting magnets
superconducting magnets
recovery
filters
Recovery
gradients
Bobbins
Cryostats
cryostats
inductance
Inductance
Magnets
slits
capacitors
Capacitors
Capacitance
magnets

Keywords

  • Copper current leads
  • degaussing circuit
  • high-gradient magnetic separation
  • superconducting magnet

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Condensed Matter Physics
  • Electronic, Optical and Magnetic Materials

Cite this

Development of degaussing system of magnetic filters for high gradient magnetic separation to improve recovery ratio of trapped magnetic Nanobeads. / Kajikawa, Kazuhiro; Ueda, Hiroshi; Kamioka, Yasuharu; Agatsuma, Koh; Fuchino, Shuichiro; Furuse, Mitsuho; Iitsuka, Tomohiro; Nakamura, Shuichi.

In: IEEE Transactions on Applied Superconductivity, Vol. 24, No. 3, 6595624, 2014.

Research output: Contribution to journalArticle

Kajikawa, Kazuhiro ; Ueda, Hiroshi ; Kamioka, Yasuharu ; Agatsuma, Koh ; Fuchino, Shuichiro ; Furuse, Mitsuho ; Iitsuka, Tomohiro ; Nakamura, Shuichi. / Development of degaussing system of magnetic filters for high gradient magnetic separation to improve recovery ratio of trapped magnetic Nanobeads. In: IEEE Transactions on Applied Superconductivity. 2014 ; Vol. 24, No. 3.
@article{2a79a7aa246d4cb1be2a86efc8a01ba7,
title = "Development of degaussing system of magnetic filters for high gradient magnetic separation to improve recovery ratio of trapped magnetic Nanobeads",
abstract = "We have successfully developed a high-gradient magnetic separation system for medical proteins using affinity magnetic nanobeads. Our system shows very high separation efficiency and can also be expected to realize lower cost due to larger production rate compared to the conventional system. The developed system consists of a 3-T superconducting magnet and a filter made of fine magnetic metal fibers. The superconducting magnet is wound with a NbTi twisted multifilamentary wire, and cooled by a 4-K Gifford-McMahon cryocooler. In order to achieve high recovery ratio of the magnetic nanobeads trapped on the filter located in a room-temperature clear bore of the cryostat, the ac degaussing system for the filter is fabricated using an inductance-capacitance resonance circuit composed of a series connection with the superconducting magnet and an additional capacitor. To perform the inductance-capacitance resonance more than a few cycles between superconducting magnet and capacitor, the superconducting magnet has a slit in the bobbin to prevent an eddy current coupled with an alternating magnetic field. It also has a control system for a high-speed switching circuit. This magnet can successfully generate a magnetic field of 3.0 T in the clear bore of the cryostat with a diameter of 30 mm in a relatively fast sweep time of 150 s due to the slit in the magnet bobbin. Using our degaussing system, a high recovery ratio of the nanobeads in pure water has been performed about 94.1{\%}.",
keywords = "Copper current leads, degaussing circuit, high-gradient magnetic separation, superconducting magnet",
author = "Kazuhiro Kajikawa and Hiroshi Ueda and Yasuharu Kamioka and Koh Agatsuma and Shuichiro Fuchino and Mitsuho Furuse and Tomohiro Iitsuka and Shuichi Nakamura",
year = "2014",
doi = "10.1109/TASC.2013.2281364",
language = "English",
volume = "24",
journal = "IEEE Transactions on Applied Superconductivity",
issn = "1051-8223",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "3",

}

TY - JOUR

T1 - Development of degaussing system of magnetic filters for high gradient magnetic separation to improve recovery ratio of trapped magnetic Nanobeads

AU - Kajikawa, Kazuhiro

AU - Ueda, Hiroshi

AU - Kamioka, Yasuharu

AU - Agatsuma, Koh

AU - Fuchino, Shuichiro

AU - Furuse, Mitsuho

AU - Iitsuka, Tomohiro

AU - Nakamura, Shuichi

PY - 2014

Y1 - 2014

N2 - We have successfully developed a high-gradient magnetic separation system for medical proteins using affinity magnetic nanobeads. Our system shows very high separation efficiency and can also be expected to realize lower cost due to larger production rate compared to the conventional system. The developed system consists of a 3-T superconducting magnet and a filter made of fine magnetic metal fibers. The superconducting magnet is wound with a NbTi twisted multifilamentary wire, and cooled by a 4-K Gifford-McMahon cryocooler. In order to achieve high recovery ratio of the magnetic nanobeads trapped on the filter located in a room-temperature clear bore of the cryostat, the ac degaussing system for the filter is fabricated using an inductance-capacitance resonance circuit composed of a series connection with the superconducting magnet and an additional capacitor. To perform the inductance-capacitance resonance more than a few cycles between superconducting magnet and capacitor, the superconducting magnet has a slit in the bobbin to prevent an eddy current coupled with an alternating magnetic field. It also has a control system for a high-speed switching circuit. This magnet can successfully generate a magnetic field of 3.0 T in the clear bore of the cryostat with a diameter of 30 mm in a relatively fast sweep time of 150 s due to the slit in the magnet bobbin. Using our degaussing system, a high recovery ratio of the nanobeads in pure water has been performed about 94.1%.

AB - We have successfully developed a high-gradient magnetic separation system for medical proteins using affinity magnetic nanobeads. Our system shows very high separation efficiency and can also be expected to realize lower cost due to larger production rate compared to the conventional system. The developed system consists of a 3-T superconducting magnet and a filter made of fine magnetic metal fibers. The superconducting magnet is wound with a NbTi twisted multifilamentary wire, and cooled by a 4-K Gifford-McMahon cryocooler. In order to achieve high recovery ratio of the magnetic nanobeads trapped on the filter located in a room-temperature clear bore of the cryostat, the ac degaussing system for the filter is fabricated using an inductance-capacitance resonance circuit composed of a series connection with the superconducting magnet and an additional capacitor. To perform the inductance-capacitance resonance more than a few cycles between superconducting magnet and capacitor, the superconducting magnet has a slit in the bobbin to prevent an eddy current coupled with an alternating magnetic field. It also has a control system for a high-speed switching circuit. This magnet can successfully generate a magnetic field of 3.0 T in the clear bore of the cryostat with a diameter of 30 mm in a relatively fast sweep time of 150 s due to the slit in the magnet bobbin. Using our degaussing system, a high recovery ratio of the nanobeads in pure water has been performed about 94.1%.

KW - Copper current leads

KW - degaussing circuit

KW - high-gradient magnetic separation

KW - superconducting magnet

UR - http://www.scopus.com/inward/record.url?scp=84884836373&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84884836373&partnerID=8YFLogxK

U2 - 10.1109/TASC.2013.2281364

DO - 10.1109/TASC.2013.2281364

M3 - Article

AN - SCOPUS:84884836373

VL - 24

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

SN - 1051-8223

IS - 3

M1 - 6595624

ER -