Design and control of active vibration isolation system with an active dynamic vibration absorber operating as accelerometer

Syed Mamun R. Rasid, Takeshi Mizuno, Yuji Ishino, Masaya Takasaki, Masayuki Hara, Daisuke Yamaguchi

Research output: Contribution to journalArticlepeer-review

7 Citations (Scopus)

Abstract

This paper exhibits the development of a vibration isolation system using an active dynamic vibration absorber (ADVA) as an accelerometer in a low-frequency range; whereas, it operates as a vibration control device in a high-frequency range. The control signal of the ADVA gives an information of the low-frequency acceleration. At the same time, in the active vibration isolation system, an air spring is employed as a low-frequency control device and an inexpensive MEMS-type accelerometer is used to measure the acceleration of the vibration in a high-frequency range. The sensor fusion technique is applied to integrate the output of the MEMS-type accelerometer and the acceleration estimated from the ADVA. The motions of the vibration isolation table and the absorber mass of the ADVA are controlled by PID control. The integrated acceleration by the sensor fusion is transmitted through a low-pass filter to the air spring and through a high-pass filter into the ADVA to attain additional acceleration and velocity feedback to the PID controls. Several experimentations and observations are conducted to measure the transmissibility and compliance. The experimental and simulation results demonstrate that the performance and operative precision of the developed active vibration isolation system are improved by the additional absolute acceleration and velocity feedbacks in terms of compliance as well as transmissibility characteristics.

Original languageEnglish
Pages (from-to)175-190
Number of pages16
JournalJournal of Sound and Vibration
Volume438
DOIs
Publication statusPublished - Jan 6 2019
Externally publishedYes

Keywords

  • Accelerometer
  • Active vibration isolation
  • Dynamic vibration absorber
  • MEMS
  • Sensor fusion
  • Vibration control

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Mechanics of Materials
  • Acoustics and Ultrasonics
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Design and control of active vibration isolation system with an active dynamic vibration absorber operating as accelerometer'. Together they form a unique fingerprint.

Cite this