Cutting Mechanism of Sialon with a Single Point Diamond

Toshikatsu Nakajima, Yoshiyuki Uno, Takanori Fujiwara, Atsunori Ikejiri

Research output: Contribution to journalArticle

Abstract

The circular cutting with a single point diamond cutting edge, in which the depth of cut is very small and takes maximum at some point, is carried out for making clear a cutting process of sialon under conditions similar to practical grinding, investigating sliding of a diamond on sialon, chip formation, groove profile, stock removal and so on. Main conclusions obtained in this study are as follows: (1) There are three different regions with depth of cut; elastic, plastic and cutting region. (2) In the transitional cutting process, there are following three types of interference with maximum depth of cut; (i) elastic region through the contact length, (ii) elastic — plastic — elastic, (iii) elastic — plastic — cutting — plastic — elastic. (3) Chips are formed by plastic deformation as well as brittle fracture. (4) Cracks generated under real interference groove become larger with increases of depth of cut and nose radius of cutting edge.

Original languageEnglish
Pages (from-to)1271-1276
Number of pages6
JournalJournal of the Japan Society for Precision Engineering
Volume53
Issue number8
DOIs
Publication statusPublished - Jan 1 1987
Externally publishedYes

Keywords

  • chip
  • circular cutting
  • cutting region
  • elastic region
  • groove profile
  • normally sintered sialon
  • plastic deformation
  • single point diamond
  • transitional cutting process

ASJC Scopus subject areas

  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Cutting Mechanism of Sialon with a Single Point Diamond'. Together they form a unique fingerprint.

  • Cite this