Cutting Mechanism of Partially Stabilized Zirconia with a Single Point Diamond

Toshikatsu Nakajima, Yoshiyuki Uno, Takanori Fujiwara, Kazuhito Oohashi

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

The circular cutting with a single point diamond cutting edge, in which the depth of cut is very small and takes maximum at some point, is carried out for making clear a cutting process of partially stabilized zirconia under conditions similar to practical grinding, investigating sliding phenomenon of a diamond cutting edge, normal cutting force, groove profile, stock removal and so on. Main conclusions obtained in this study are as follows : 11) There are three different regions with depth of cut ; elastic, plastic and cutting region. (2) There are critical depths and critical normal forces at the beginning point of plastic deformation and cutting. (3) In the transitional cutting process, there are following three types of interference with maximum depth of cut ; (i) elastic region through the contact length, (ii) elastic-plastic-elastic, (iii) elastic-plastic-cutting-plastic-elastic. (4) Surface generation of a groove is performed by plastic deformation as well as brittle fracture.

Original languageEnglish
Pages (from-to)1544-1549
Number of pages6
JournalJournal of the Japan Society for Precision Engineering
Volume54
Issue number8
DOIs
Publication statusPublished - 1988
Externally publishedYes

Fingerprint

Zirconia
Diamonds
Plastics
Plastic deformation
Brittle fracture

Keywords

  • circular cutting
  • critical depth
  • critical normal force
  • cutting region
  • elastic region
  • groove profile
  • partially stabilized zirconia
  • plastic deformation
  • single point diamond
  • transitional cutting process

ASJC Scopus subject areas

  • Mechanical Engineering

Cite this

Cutting Mechanism of Partially Stabilized Zirconia with a Single Point Diamond. / Nakajima, Toshikatsu; Uno, Yoshiyuki; Fujiwara, Takanori; Oohashi, Kazuhito.

In: Journal of the Japan Society for Precision Engineering, Vol. 54, No. 8, 1988, p. 1544-1549.

Research output: Contribution to journalArticle

Nakajima, Toshikatsu ; Uno, Yoshiyuki ; Fujiwara, Takanori ; Oohashi, Kazuhito. / Cutting Mechanism of Partially Stabilized Zirconia with a Single Point Diamond. In: Journal of the Japan Society for Precision Engineering. 1988 ; Vol. 54, No. 8. pp. 1544-1549.
@article{7d26276c95984de89edd49f8490a9c66,
title = "Cutting Mechanism of Partially Stabilized Zirconia with a Single Point Diamond",
abstract = "The circular cutting with a single point diamond cutting edge, in which the depth of cut is very small and takes maximum at some point, is carried out for making clear a cutting process of partially stabilized zirconia under conditions similar to practical grinding, investigating sliding phenomenon of a diamond cutting edge, normal cutting force, groove profile, stock removal and so on. Main conclusions obtained in this study are as follows : 11) There are three different regions with depth of cut ; elastic, plastic and cutting region. (2) There are critical depths and critical normal forces at the beginning point of plastic deformation and cutting. (3) In the transitional cutting process, there are following three types of interference with maximum depth of cut ; (i) elastic region through the contact length, (ii) elastic-plastic-elastic, (iii) elastic-plastic-cutting-plastic-elastic. (4) Surface generation of a groove is performed by plastic deformation as well as brittle fracture.",
keywords = "circular cutting, critical depth, critical normal force, cutting region, elastic region, groove profile, partially stabilized zirconia, plastic deformation, single point diamond, transitional cutting process",
author = "Toshikatsu Nakajima and Yoshiyuki Uno and Takanori Fujiwara and Kazuhito Oohashi",
year = "1988",
doi = "10.2493/jjspe.54.1544",
language = "English",
volume = "54",
pages = "1544--1549",
journal = "Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering",
issn = "0912-0289",
publisher = "Japan Society for Precision Engineering",
number = "8",

}

TY - JOUR

T1 - Cutting Mechanism of Partially Stabilized Zirconia with a Single Point Diamond

AU - Nakajima, Toshikatsu

AU - Uno, Yoshiyuki

AU - Fujiwara, Takanori

AU - Oohashi, Kazuhito

PY - 1988

Y1 - 1988

N2 - The circular cutting with a single point diamond cutting edge, in which the depth of cut is very small and takes maximum at some point, is carried out for making clear a cutting process of partially stabilized zirconia under conditions similar to practical grinding, investigating sliding phenomenon of a diamond cutting edge, normal cutting force, groove profile, stock removal and so on. Main conclusions obtained in this study are as follows : 11) There are three different regions with depth of cut ; elastic, plastic and cutting region. (2) There are critical depths and critical normal forces at the beginning point of plastic deformation and cutting. (3) In the transitional cutting process, there are following three types of interference with maximum depth of cut ; (i) elastic region through the contact length, (ii) elastic-plastic-elastic, (iii) elastic-plastic-cutting-plastic-elastic. (4) Surface generation of a groove is performed by plastic deformation as well as brittle fracture.

AB - The circular cutting with a single point diamond cutting edge, in which the depth of cut is very small and takes maximum at some point, is carried out for making clear a cutting process of partially stabilized zirconia under conditions similar to practical grinding, investigating sliding phenomenon of a diamond cutting edge, normal cutting force, groove profile, stock removal and so on. Main conclusions obtained in this study are as follows : 11) There are three different regions with depth of cut ; elastic, plastic and cutting region. (2) There are critical depths and critical normal forces at the beginning point of plastic deformation and cutting. (3) In the transitional cutting process, there are following three types of interference with maximum depth of cut ; (i) elastic region through the contact length, (ii) elastic-plastic-elastic, (iii) elastic-plastic-cutting-plastic-elastic. (4) Surface generation of a groove is performed by plastic deformation as well as brittle fracture.

KW - circular cutting

KW - critical depth

KW - critical normal force

KW - cutting region

KW - elastic region

KW - groove profile

KW - partially stabilized zirconia

KW - plastic deformation

KW - single point diamond

KW - transitional cutting process

UR - http://www.scopus.com/inward/record.url?scp=85004234604&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85004234604&partnerID=8YFLogxK

U2 - 10.2493/jjspe.54.1544

DO - 10.2493/jjspe.54.1544

M3 - Article

VL - 54

SP - 1544

EP - 1549

JO - Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering

JF - Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering

SN - 0912-0289

IS - 8

ER -