Crystallinity of anodic TiO 2 nanotubes and bioactivity

Sang Hyun An, Ramaswamy Narayanan, Takuya Matsumoto, Hyo Jin Lee, Tae Yub Kwon, Kyo Han Kim

Research output: Contribution to journalArticle

20 Citations (Scopus)

Abstract

Anodic TiO 2 nanotubes were produced on titanium at 20 V using 1 M Na 2 SO 4 and 0.5 wt% NaF. Oxidation for 3 hours produced amorphous tubes of diameter 100 nm and thicknesses 2 μm. Heat-treatments were done for 3 hours at different temperatures. 300 °C treatment converted the amorphous coatings to anatase. 550 and 700 °C treatments formed dual anatase and rutile; 850 °C treatment crystallized to rutile. The treatment at 700 °C produced an oxide surface with higher roughness, lower wetting angle and higher coating adhesion. Bioactivity of the as-oxidized and heated coatings were evaluated by treating them in a simulated body fluid (SBF) to form hydroxyapatite (HA) and the rates of HA formation were compared. Deposits of HA could be seen on the dual oxide structure within 3 days. HA was detected after 7 days in the anatase structure and only after 21 days in the amorphous and rutile structures. In vitro cell culture tests done using mouse osteoblasts indicated that, the 700 °C-heated surface showed higher levels of cell activity than the other surfaces. It is concluded that the dual rutile and anatase structure formed by heating the oxide at 700 °C is the best of the five surfaces tested.

Original languageEnglish
Pages (from-to)4910-4918
Number of pages9
JournalJournal of Nanoscience and Nanotechnology
Volume11
Issue number6
DOIs
Publication statusPublished - Dec 1 2011
Externally publishedYes

    Fingerprint

Keywords

  • Anodic oxidation
  • Bioactivity
  • Biomaterials
  • Crystallinity
  • Nanotube
  • Titanium

ASJC Scopus subject areas

  • Bioengineering
  • Chemistry(all)
  • Biomedical Engineering
  • Materials Science(all)
  • Condensed Matter Physics

Cite this