Computer-Aided Operability Study for Batch Plants

Yukiyasu Shimada, Kazuhiko Suzuki, Hayatoshi Sayama, Ichiro Nojiri

Research output: Contribution to journalArticle

Abstract

Operability study is a systematic technique for identifying hazards or operability problems throughout an entire facility, but requires a labor-intensive and time-consuming process. This paper presents an algorithm for a computer-aided operability study for batch plantg using knowledge engineering. The batch plant Operation consists of these three processes “charge,” “reaction” and “discharge.” Operability study for batch plants should be carried out for each operating step. The knowledge to perform the operability study is separated into plant specific knowledge and generic data to facilitate the development of widely applicable systems. Causal relationships between input variable deviations and output variable deviations for components of batch plants are modeled using decision tables and stored in the generic data base. The plant structure (Piping and Instrumentation Diagram) and reaction types are inputted to the plant specific knowledge base. Each process variable of equipment (manipulating variables, initial conditions of state variables and operating time) is examined in sequence by searching the generic data base, using key words to describe deviations. A computer-aided operability study is demonstrated for a polyvinyl acetate plant using the proposed methodology.

Original languageEnglish
Pages (from-to)1111-1123
Number of pages13
JournalKAGAKU KOGAKU RONBUNSHU
Volume22
Issue number5
DOIs
Publication statusPublished - Jan 1 1996

    Fingerprint

Keywords

  • Batch Plants
  • Expert System
  • Knowledge Engineering
  • Operability Study
  • Systems Engineering

ASJC Scopus subject areas

  • Chemistry(all)
  • Chemical Engineering(all)

Cite this