Combustion characteristics of wet ethanol ignited using a focused Q-switched Nd: YAG nanosecond laser

Kazi Mostafijur Rahman, Nobuyuki Kawahara, Kazuya Tsuboi, Eiji Tomita

Research output: Contribution to journalArticle

10 Citations (Scopus)

Abstract

Ethanol is a particularly promising bio-fuel, which is already widely used in the transportation sector. Much research has focused on laser ignition in internal combustion engines, because it offers a number of significant advantages. The motivation of this study is to reduce the higher cost of anhydrous ethanol by enabling the direct use of wet ethanol for combustion applications. This study reports the effects of water content on the laser ignition characteristics of air-ethanol flames with 0-40% water by volume added to the ethanol. Laser-induced breakdown was generated by focusing a 532-nm nanosecond pulse from a Q-switched Nd:YAG laser. High-speed visualisation of the combustion was achieved, together with analyses of the in-chamber pressure history, mass fraction burned, and ignition delay over a range of equivalence ratios. Removing the final 20% of water from ethanol is particularly energy intensive. The results of this investigation revealed that the flame growth rate and flame propagation velocity are both increased by adding up to 20% water (by volume) to ethanol, indicating a positive effect of the water at relatively low concentrations. It was also found that the ignition delay was shorter as the water content was increased up to a volume fraction of 20%. Therefore, it can be hypothesised that the presence of water enhances the ionisation process and increases the rate of radical generation during laser-induced breakdown of wet ethanol. Numerical analysis using the commercial software package CHEMKIN-PRO revealed a reduction in adiabatic flame temperature and laminar burning velocity due to the addition of water to ethanol.

Original languageEnglish
Pages (from-to)331-340
Number of pages10
JournalFuel
Volume165
DOIs
Publication statusPublished - Feb 1 2016

Fingerprint

Ethanol
Lasers
Ignition
Water
Water content
Adiabatic flame temperature
Internal combustion engines
Software packages
Ionization
Numerical analysis
Laser pulses
Volume fraction
Visualization
Air
Costs

Keywords

  • Flame propagation
  • Laser ignition
  • Laser ignition delay
  • Mass fraction burned
  • Wet ethanol

ASJC Scopus subject areas

  • Fuel Technology
  • Energy Engineering and Power Technology
  • Chemical Engineering(all)
  • Organic Chemistry

Cite this

Combustion characteristics of wet ethanol ignited using a focused Q-switched Nd : YAG nanosecond laser. / Rahman, Kazi Mostafijur; Kawahara, Nobuyuki; Tsuboi, Kazuya; Tomita, Eiji.

In: Fuel, Vol. 165, 01.02.2016, p. 331-340.

Research output: Contribution to journalArticle

@article{d82672876bef4abeabaaca9523f23049,
title = "Combustion characteristics of wet ethanol ignited using a focused Q-switched Nd: YAG nanosecond laser",
abstract = "Ethanol is a particularly promising bio-fuel, which is already widely used in the transportation sector. Much research has focused on laser ignition in internal combustion engines, because it offers a number of significant advantages. The motivation of this study is to reduce the higher cost of anhydrous ethanol by enabling the direct use of wet ethanol for combustion applications. This study reports the effects of water content on the laser ignition characteristics of air-ethanol flames with 0-40{\%} water by volume added to the ethanol. Laser-induced breakdown was generated by focusing a 532-nm nanosecond pulse from a Q-switched Nd:YAG laser. High-speed visualisation of the combustion was achieved, together with analyses of the in-chamber pressure history, mass fraction burned, and ignition delay over a range of equivalence ratios. Removing the final 20{\%} of water from ethanol is particularly energy intensive. The results of this investigation revealed that the flame growth rate and flame propagation velocity are both increased by adding up to 20{\%} water (by volume) to ethanol, indicating a positive effect of the water at relatively low concentrations. It was also found that the ignition delay was shorter as the water content was increased up to a volume fraction of 20{\%}. Therefore, it can be hypothesised that the presence of water enhances the ionisation process and increases the rate of radical generation during laser-induced breakdown of wet ethanol. Numerical analysis using the commercial software package CHEMKIN-PRO revealed a reduction in adiabatic flame temperature and laminar burning velocity due to the addition of water to ethanol.",
keywords = "Flame propagation, Laser ignition, Laser ignition delay, Mass fraction burned, Wet ethanol",
author = "Rahman, {Kazi Mostafijur} and Nobuyuki Kawahara and Kazuya Tsuboi and Eiji Tomita",
year = "2016",
month = "2",
day = "1",
doi = "10.1016/j.fuel.2015.10.067",
language = "English",
volume = "165",
pages = "331--340",
journal = "Fuel",
issn = "0016-2361",
publisher = "Elsevier BV",

}

TY - JOUR

T1 - Combustion characteristics of wet ethanol ignited using a focused Q-switched Nd

T2 - YAG nanosecond laser

AU - Rahman, Kazi Mostafijur

AU - Kawahara, Nobuyuki

AU - Tsuboi, Kazuya

AU - Tomita, Eiji

PY - 2016/2/1

Y1 - 2016/2/1

N2 - Ethanol is a particularly promising bio-fuel, which is already widely used in the transportation sector. Much research has focused on laser ignition in internal combustion engines, because it offers a number of significant advantages. The motivation of this study is to reduce the higher cost of anhydrous ethanol by enabling the direct use of wet ethanol for combustion applications. This study reports the effects of water content on the laser ignition characteristics of air-ethanol flames with 0-40% water by volume added to the ethanol. Laser-induced breakdown was generated by focusing a 532-nm nanosecond pulse from a Q-switched Nd:YAG laser. High-speed visualisation of the combustion was achieved, together with analyses of the in-chamber pressure history, mass fraction burned, and ignition delay over a range of equivalence ratios. Removing the final 20% of water from ethanol is particularly energy intensive. The results of this investigation revealed that the flame growth rate and flame propagation velocity are both increased by adding up to 20% water (by volume) to ethanol, indicating a positive effect of the water at relatively low concentrations. It was also found that the ignition delay was shorter as the water content was increased up to a volume fraction of 20%. Therefore, it can be hypothesised that the presence of water enhances the ionisation process and increases the rate of radical generation during laser-induced breakdown of wet ethanol. Numerical analysis using the commercial software package CHEMKIN-PRO revealed a reduction in adiabatic flame temperature and laminar burning velocity due to the addition of water to ethanol.

AB - Ethanol is a particularly promising bio-fuel, which is already widely used in the transportation sector. Much research has focused on laser ignition in internal combustion engines, because it offers a number of significant advantages. The motivation of this study is to reduce the higher cost of anhydrous ethanol by enabling the direct use of wet ethanol for combustion applications. This study reports the effects of water content on the laser ignition characteristics of air-ethanol flames with 0-40% water by volume added to the ethanol. Laser-induced breakdown was generated by focusing a 532-nm nanosecond pulse from a Q-switched Nd:YAG laser. High-speed visualisation of the combustion was achieved, together with analyses of the in-chamber pressure history, mass fraction burned, and ignition delay over a range of equivalence ratios. Removing the final 20% of water from ethanol is particularly energy intensive. The results of this investigation revealed that the flame growth rate and flame propagation velocity are both increased by adding up to 20% water (by volume) to ethanol, indicating a positive effect of the water at relatively low concentrations. It was also found that the ignition delay was shorter as the water content was increased up to a volume fraction of 20%. Therefore, it can be hypothesised that the presence of water enhances the ionisation process and increases the rate of radical generation during laser-induced breakdown of wet ethanol. Numerical analysis using the commercial software package CHEMKIN-PRO revealed a reduction in adiabatic flame temperature and laminar burning velocity due to the addition of water to ethanol.

KW - Flame propagation

KW - Laser ignition

KW - Laser ignition delay

KW - Mass fraction burned

KW - Wet ethanol

UR - http://www.scopus.com/inward/record.url?scp=84945923321&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84945923321&partnerID=8YFLogxK

U2 - 10.1016/j.fuel.2015.10.067

DO - 10.1016/j.fuel.2015.10.067

M3 - Article

AN - SCOPUS:84945923321

VL - 165

SP - 331

EP - 340

JO - Fuel

JF - Fuel

SN - 0016-2361

ER -