An experimental investigation of sorption process in fluidized bed with cooling pipe

Akihiko Horibe, Syahrul Husain, Hideo Inaba, Naoto Haruki, Ping Tu

Research output: Contribution to journalArticle

7 Citations (Scopus)

Abstract

An experimental investigation of a fluidized bed with multiple cooling pipes was conducted to study adsorption characteristics of a new organic sorbent desiccant material (HU300P) for a new air conditioning system. The mass ratio of the present sorbent desiccant powder type is from 1.3 to 2.3 times greater than that of silica gel. The sorption rate of the water vapor in the sorbent bed was measured under various conditions. It was found that the sorption rate is highly dependent on the effect of cooling pipes. The sorption ratio increases and the completion time for the sorption process decreases by using multiple cooling pipes.

Original languageEnglish
Pages (from-to)1-4
Number of pages4
JournalJournal of Heat Transfer
Volume130
Issue number11
DOIs
Publication statusPublished - Nov 2008

Fingerprint

Fluidized beds
sorption
Sorption
beds
sorbents
Sorbents
Hygroscopic Agents
Pipe
desiccants
Cooling
cooling
air conditioning
Silica Gel
Steam
Silica gel
silica gel
Air conditioning
mass ratios
Powders
Water vapor

Keywords

  • Cooling pipe
  • Fluidized bed
  • Sorption polymer

ASJC Scopus subject areas

  • Mechanical Engineering
  • Mechanics of Materials
  • Materials Science(all)
  • Condensed Matter Physics

Cite this

An experimental investigation of sorption process in fluidized bed with cooling pipe. / Horibe, Akihiko; Husain, Syahrul; Inaba, Hideo; Haruki, Naoto; Tu, Ping.

In: Journal of Heat Transfer, Vol. 130, No. 11, 11.2008, p. 1-4.

Research output: Contribution to journalArticle

Horibe, Akihiko ; Husain, Syahrul ; Inaba, Hideo ; Haruki, Naoto ; Tu, Ping. / An experimental investigation of sorption process in fluidized bed with cooling pipe. In: Journal of Heat Transfer. 2008 ; Vol. 130, No. 11. pp. 1-4.
@article{f0b4a4041bda411b9bdd3c206f9d4a87,
title = "An experimental investigation of sorption process in fluidized bed with cooling pipe",
abstract = "An experimental investigation of a fluidized bed with multiple cooling pipes was conducted to study adsorption characteristics of a new organic sorbent desiccant material (HU300P) for a new air conditioning system. The mass ratio of the present sorbent desiccant powder type is from 1.3 to 2.3 times greater than that of silica gel. The sorption rate of the water vapor in the sorbent bed was measured under various conditions. It was found that the sorption rate is highly dependent on the effect of cooling pipes. The sorption ratio increases and the completion time for the sorption process decreases by using multiple cooling pipes.",
keywords = "Cooling pipe, Fluidized bed, Sorption polymer",
author = "Akihiko Horibe and Syahrul Husain and Hideo Inaba and Naoto Haruki and Ping Tu",
year = "2008",
month = "11",
doi = "10.1115/1.2970076",
language = "English",
volume = "130",
pages = "1--4",
journal = "Journal of Heat Transfer",
issn = "0022-1481",
publisher = "American Society of Mechanical Engineers(ASME)",
number = "11",

}

TY - JOUR

T1 - An experimental investigation of sorption process in fluidized bed with cooling pipe

AU - Horibe, Akihiko

AU - Husain, Syahrul

AU - Inaba, Hideo

AU - Haruki, Naoto

AU - Tu, Ping

PY - 2008/11

Y1 - 2008/11

N2 - An experimental investigation of a fluidized bed with multiple cooling pipes was conducted to study adsorption characteristics of a new organic sorbent desiccant material (HU300P) for a new air conditioning system. The mass ratio of the present sorbent desiccant powder type is from 1.3 to 2.3 times greater than that of silica gel. The sorption rate of the water vapor in the sorbent bed was measured under various conditions. It was found that the sorption rate is highly dependent on the effect of cooling pipes. The sorption ratio increases and the completion time for the sorption process decreases by using multiple cooling pipes.

AB - An experimental investigation of a fluidized bed with multiple cooling pipes was conducted to study adsorption characteristics of a new organic sorbent desiccant material (HU300P) for a new air conditioning system. The mass ratio of the present sorbent desiccant powder type is from 1.3 to 2.3 times greater than that of silica gel. The sorption rate of the water vapor in the sorbent bed was measured under various conditions. It was found that the sorption rate is highly dependent on the effect of cooling pipes. The sorption ratio increases and the completion time for the sorption process decreases by using multiple cooling pipes.

KW - Cooling pipe

KW - Fluidized bed

KW - Sorption polymer

UR - http://www.scopus.com/inward/record.url?scp=77955263798&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77955263798&partnerID=8YFLogxK

U2 - 10.1115/1.2970076

DO - 10.1115/1.2970076

M3 - Article

VL - 130

SP - 1

EP - 4

JO - Journal of Heat Transfer

JF - Journal of Heat Transfer

SN - 0022-1481

IS - 11

ER -