A proposal on creep damage analysis of welded joint of low-alloy steel considering microscopic damage progress

Fumiko Kawashima, Takumi Tokiyoshi, Toshihide Igari, Akira Shiibashi, Naoya Tada

Research output: Contribution to journalArticle

7 Citations (Scopus)

Abstract

Creep damage analysis method of welded joint on the basis of the random fracture resistance model was proposed and was applied to the creep damage evaluation of welded joint of low alloy steel. Firstly a random fracture resistance of grain boundaries, an initiation and a growth driving forces of small defects, which were necessary in the above model, were determined considering the stress-dependent damage progress of the fine-grain HAZ material of 21/4Cr-1Mo steel. Secondly a procedure combining both the stress distribution in the welded joint and the random fracture resistance model was concretely proposed and was applied to the creep damage evaluation of the model test and the actual power piping. Experimental results of both the time history and the distribution of the number density of small defects in the welded joint were successfully reproduced by the proposed method.

Original languageEnglish
Pages (from-to)631-638
Number of pages8
JournalZairyo/Journal of the Society of Materials Science, Japan
Volume52
Issue number6
Publication statusPublished - Jun 2003

Fingerprint

welded joints
high strength steels
High strength steel
proposals
Creep
Welds
fracture strength
damage
Fracture toughness
Defects
heat affected zone
evaluation
Steel
defects
stress distribution
Stress concentration
Grain boundaries
grain boundaries
histories
steels

Keywords

  • 21/4Cr-1Mo steel
  • Creep
  • Damage
  • Small defect
  • Type IV
  • Welded joint

ASJC Scopus subject areas

  • Metals and Alloys
  • Chemical Engineering (miscellaneous)
  • Polymers and Plastics

Cite this

A proposal on creep damage analysis of welded joint of low-alloy steel considering microscopic damage progress. / Kawashima, Fumiko; Tokiyoshi, Takumi; Igari, Toshihide; Shiibashi, Akira; Tada, Naoya.

In: Zairyo/Journal of the Society of Materials Science, Japan, Vol. 52, No. 6, 06.2003, p. 631-638.

Research output: Contribution to journalArticle

Kawashima, Fumiko ; Tokiyoshi, Takumi ; Igari, Toshihide ; Shiibashi, Akira ; Tada, Naoya. / A proposal on creep damage analysis of welded joint of low-alloy steel considering microscopic damage progress. In: Zairyo/Journal of the Society of Materials Science, Japan. 2003 ; Vol. 52, No. 6. pp. 631-638.
@article{1dc21a9c9ac4479c885d82d4b5aa6172,
title = "A proposal on creep damage analysis of welded joint of low-alloy steel considering microscopic damage progress",
abstract = "Creep damage analysis method of welded joint on the basis of the random fracture resistance model was proposed and was applied to the creep damage evaluation of welded joint of low alloy steel. Firstly a random fracture resistance of grain boundaries, an initiation and a growth driving forces of small defects, which were necessary in the above model, were determined considering the stress-dependent damage progress of the fine-grain HAZ material of 21/4Cr-1Mo steel. Secondly a procedure combining both the stress distribution in the welded joint and the random fracture resistance model was concretely proposed and was applied to the creep damage evaluation of the model test and the actual power piping. Experimental results of both the time history and the distribution of the number density of small defects in the welded joint were successfully reproduced by the proposed method.",
keywords = "21/4Cr-1Mo steel, Creep, Damage, Small defect, Type IV, Welded joint",
author = "Fumiko Kawashima and Takumi Tokiyoshi and Toshihide Igari and Akira Shiibashi and Naoya Tada",
year = "2003",
month = "6",
language = "English",
volume = "52",
pages = "631--638",
journal = "Zairyo/Journal of the Society of Materials Science, Japan",
issn = "0514-5163",
publisher = "Society of Materials Science Japan",
number = "6",

}

TY - JOUR

T1 - A proposal on creep damage analysis of welded joint of low-alloy steel considering microscopic damage progress

AU - Kawashima, Fumiko

AU - Tokiyoshi, Takumi

AU - Igari, Toshihide

AU - Shiibashi, Akira

AU - Tada, Naoya

PY - 2003/6

Y1 - 2003/6

N2 - Creep damage analysis method of welded joint on the basis of the random fracture resistance model was proposed and was applied to the creep damage evaluation of welded joint of low alloy steel. Firstly a random fracture resistance of grain boundaries, an initiation and a growth driving forces of small defects, which were necessary in the above model, were determined considering the stress-dependent damage progress of the fine-grain HAZ material of 21/4Cr-1Mo steel. Secondly a procedure combining both the stress distribution in the welded joint and the random fracture resistance model was concretely proposed and was applied to the creep damage evaluation of the model test and the actual power piping. Experimental results of both the time history and the distribution of the number density of small defects in the welded joint were successfully reproduced by the proposed method.

AB - Creep damage analysis method of welded joint on the basis of the random fracture resistance model was proposed and was applied to the creep damage evaluation of welded joint of low alloy steel. Firstly a random fracture resistance of grain boundaries, an initiation and a growth driving forces of small defects, which were necessary in the above model, were determined considering the stress-dependent damage progress of the fine-grain HAZ material of 21/4Cr-1Mo steel. Secondly a procedure combining both the stress distribution in the welded joint and the random fracture resistance model was concretely proposed and was applied to the creep damage evaluation of the model test and the actual power piping. Experimental results of both the time history and the distribution of the number density of small defects in the welded joint were successfully reproduced by the proposed method.

KW - 21/4Cr-1Mo steel

KW - Creep

KW - Damage

KW - Small defect

KW - Type IV

KW - Welded joint

UR - http://www.scopus.com/inward/record.url?scp=0042389723&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0042389723&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0042389723

VL - 52

SP - 631

EP - 638

JO - Zairyo/Journal of the Society of Materials Science, Japan

JF - Zairyo/Journal of the Society of Materials Science, Japan

SN - 0514-5163

IS - 6

ER -