A novel detection method of active and reactive currents in single-phase circuits using PLL circuit

Yasushi Omura, Eiji Hiraki, Toshihiko Tanaka

Research output: Contribution to journalArticle

Abstract

This paper proposes a novel detection method of active and reactive currents in single-phase circuits. This method uses only two multipliers and LPFs for detecting active and reactive currents with a PLL circuit. In the proposed method the fundamental active-reactive component in single-phase circuits can be detected by LPFs in the time domain like the instantaneous active-reactive power theory in three-phase circuits. The basic principle of the proposed detection method is discussed in detail, and then confirmed by digital computer simulation. Digital computer simulation results demonstrate that the proposed method can detect the active-reactive current in single-phase circuits in the time domain.

Original languageEnglish
Pages (from-to)538-539
Number of pages2
JournalIEEJ Transactions on Industry Applications
Volume127
Issue number5
DOIs
Publication statusPublished - 2007
Externally publishedYes

Fingerprint

Phase locked loops
Networks (circuits)
Digital computers
Computer simulation
Reactive power

Keywords

  • Active-reactive current
  • PLL circuit
  • Single-phase active power filter
  • Single-phase circuits
  • Time domain

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Industrial and Manufacturing Engineering

Cite this

A novel detection method of active and reactive currents in single-phase circuits using PLL circuit. / Omura, Yasushi; Hiraki, Eiji; Tanaka, Toshihiko.

In: IEEJ Transactions on Industry Applications, Vol. 127, No. 5, 2007, p. 538-539.

Research output: Contribution to journalArticle

@article{650b4fd94cd7486c82dfd615fc6cd60b,
title = "A novel detection method of active and reactive currents in single-phase circuits using PLL circuit",
abstract = "This paper proposes a novel detection method of active and reactive currents in single-phase circuits. This method uses only two multipliers and LPFs for detecting active and reactive currents with a PLL circuit. In the proposed method the fundamental active-reactive component in single-phase circuits can be detected by LPFs in the time domain like the instantaneous active-reactive power theory in three-phase circuits. The basic principle of the proposed detection method is discussed in detail, and then confirmed by digital computer simulation. Digital computer simulation results demonstrate that the proposed method can detect the active-reactive current in single-phase circuits in the time domain.",
keywords = "Active-reactive current, PLL circuit, Single-phase active power filter, Single-phase circuits, Time domain",
author = "Yasushi Omura and Eiji Hiraki and Toshihiko Tanaka",
year = "2007",
doi = "10.1541/ieejias.127.538",
language = "English",
volume = "127",
pages = "538--539",
journal = "IEEJ Transactions on Industry Applications",
issn = "0913-6339",
publisher = "The Institute of Electrical Engineers of Japan",
number = "5",

}

TY - JOUR

T1 - A novel detection method of active and reactive currents in single-phase circuits using PLL circuit

AU - Omura, Yasushi

AU - Hiraki, Eiji

AU - Tanaka, Toshihiko

PY - 2007

Y1 - 2007

N2 - This paper proposes a novel detection method of active and reactive currents in single-phase circuits. This method uses only two multipliers and LPFs for detecting active and reactive currents with a PLL circuit. In the proposed method the fundamental active-reactive component in single-phase circuits can be detected by LPFs in the time domain like the instantaneous active-reactive power theory in three-phase circuits. The basic principle of the proposed detection method is discussed in detail, and then confirmed by digital computer simulation. Digital computer simulation results demonstrate that the proposed method can detect the active-reactive current in single-phase circuits in the time domain.

AB - This paper proposes a novel detection method of active and reactive currents in single-phase circuits. This method uses only two multipliers and LPFs for detecting active and reactive currents with a PLL circuit. In the proposed method the fundamental active-reactive component in single-phase circuits can be detected by LPFs in the time domain like the instantaneous active-reactive power theory in three-phase circuits. The basic principle of the proposed detection method is discussed in detail, and then confirmed by digital computer simulation. Digital computer simulation results demonstrate that the proposed method can detect the active-reactive current in single-phase circuits in the time domain.

KW - Active-reactive current

KW - PLL circuit

KW - Single-phase active power filter

KW - Single-phase circuits

KW - Time domain

UR - http://www.scopus.com/inward/record.url?scp=34249656819&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=34249656819&partnerID=8YFLogxK

U2 - 10.1541/ieejias.127.538

DO - 10.1541/ieejias.127.538

M3 - Article

AN - SCOPUS:34249656819

VL - 127

SP - 538

EP - 539

JO - IEEJ Transactions on Industry Applications

JF - IEEJ Transactions on Industry Applications

SN - 0913-6339

IS - 5

ER -