Find Research outputs

Search results

• Paper

  Evaluation of capillary barrier system under lateral non-flow condition of sand layer

  Kim, B. S., Takeshita, Y., Park, S. W. & Kato, S., 2019.

  Research output: Contribution to conference › Paper › peer-review

• Evaluation of damaged region at the groove edge of TCO film in pulsed fiber laser processing

  Okamoto, Y., Takahashi, N., Nakashiba, S. I., Sakagawa, T. & Okada, A., 2012, p. 860-865. 6 p.

  Research output: Contribution to conference › Paper › peer-review

• Evaluation of drowsiness of driver based on change of sitting pressure center

  Murata, A., Urakami, Y., Koriyama, T., Ikeda, M. & Hayami, T., Jan 1 2013, p. 1760-1765. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  7 Citations (Scopus)

• Evaluation of expected damage costs for earth-fill breaches due to heavy rains by response surface method

  Nishimura, S. I., Shuku, T. & Shibata, T., 2020.

  Research output: Contribution to conference › Paper › peer-review

• Evaluation of mental fatigue in human-computer interaction - Analysis using feature parameters extracted from event-related potential

  Murata, A. & Uetake, A., Dec 1 2001, p. 630-635. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  8 Citations (Scopus)

• Evaluation of molten zone in glass welding using ultra-short pulsed laser

  Mohid, Z. B., Okamoto, Y., Yamamoto, K., Uno, Y., Miyamoto, I., Cvecek, K., Schmidt, M. & Bechtold, P., 2009.

  Research output: Contribution to conference › Paper › peer-review
  2 Citations (Scopus)

• Evaluation of non functional requirements in a request for proposal (RFP)

  Saito, Y., Monden, A. & Matsumoto, K., 2012, p. 106-111. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  6 Citations (Scopus)

• Evaluation of properties of a composite consisting of polymer and titanium dioxide controlled morphology

  Furuzono, T., Okada, M., Yamada, R., Iwasaki, M., Ito, S. & Sasaki, T., Dec 1 2005. 1 p.

  Research output: Contribution to conference › Paper › peer-review

• Evaluation of spark location distribution in wire EDM by high-speed observation

  Nakazawa, M., Okada, A., Yamauchi, T. & Uno, Y., Dec 1 2009.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• Evaluation of the spatial variability of cone penetration resistance inside an earth-fill dam composed of materials with different particle sizes with use of geostatistics

  Imaide, K., Nishimura, S., Shibata, T. & Shuku, T., 2020.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• Evaluation system of physical exercise ability using bio-electrical impedance

  Nakamura, T. & Yamamoto, Y., Jan 1 2001, p. 2053-2058. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  6 Citations (Scopus)

• Evolutionary head pose measurement by stereo model matching

  Song, W., Minami, M. & Mae, Y., 2005, p. 2871-2876. 6 p.

  Research output: Contribution to conference › Paper › peer-review

• Evolutionary routing method for multi mobile robots in transportation

  Konishi, M., Nishi, T., Nakano, K. & Sotobayashi, K., 2002, p. 490-495. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  4 Citations (Scopus)

• Evolution strategy: A new Time-Variant Mutation for fine local tuning

  Hashem, M. M. A., Watanabe, K. & Izumi, K., Dec 1 1997, p. 1099-1104. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  4 Citations (Scopus)

• Evolution strategy with competing subpopulations

  Izumi, K., Hashem, M. M. A. & Watanabe, K., Jan 1 1997, p. 306-311. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  6 Citations (Scopus)

• Examination about the predictive precision of the rockfall behavior by the numerical simulation

  Ma, G. C., Matsuyama, H., Nishiyama, S. & Ohnishi, Y., 2013, p. 193-199. 7 p.

  Research output: Contribution to conference › Paper › peer-review

• Expansion of smoothed area on hole bottom surface by setting magnetic block in large-area electron beam irradiation

  Shinonaga, T., Kimura, M. & Okada, A., Nov 13 2017.

  Research output: Contribution to conference › Paper › peer-review

• Experimental and numerical study of chaotic mixing in a curved-square duct flow

  Hayamizu, Y., Yanase, S., Nishida, K. & Yamamoto, K., Jan 1 2020.

  Research output: Contribution to conference › Paper › peer-review

• Experimental evaluations of prediction servoing to moving object by hand-eye robotic system

  Sunami, Y., Minami, M. & Yanou, A., Jan 1 2013, p. 1310-1315. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  5 Citations (Scopus)

• Experimental study of indoor propagation characteristics including radiation pattern and polarization of base station

  Fujimori, K. & Arai, H., Dec 1 1997, p. 1217-1220. 4 p.

  Research output: Contribution to conference › Paper › peer-review

• Experimental Study of Scouring Process and Flow Behavior around a Spur Dike during the Surge Pass

  Mioduszewski, T. M. & Maeno, S., Dec 1 2003, p. 2203-2208. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• Experimental study on the magneto-aerodynamic force deflected by magnetic field interaction in a weakly-ionized plasma flow

  Nagata, Y., Satofuka, Y., Watanabe, Y., Tezuka, A., Yamada, K. & Abe, T., 2013.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• Experimental study on thermal contact resistance of multiwalled carbon nanotubes

  Tsuru, K., Yamada, Y., Ikuta, T., Nishiyama, T. & Takahashi, K., 2013.

  Research output: Contribution to conference › Paper › peer-review

• Experimental verification of micro end-milling condition decision methodology using data-mining system

  Kodama, H., Okuda, K. & Tanaka, K., 2017, p. 1027-1032. 6 p.

  Research output: Contribution to conference › Paper › peer-review

• Experimental verification of the continuous pressurization method on SWCC

  Park, H. S., Kim, B. S., Kato, S. & Park, S. W., 2019.

  Research output: Contribution to conference › Paper › peer-review

• Experiments on a remote appreciation robot in an art museum

  Maeyama, S., Yuta, S. & Harada, A., Dec 1 2000, p. 1008-1013. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  13 Citations (Scopus)

• Experiment systems using three types of motors for biomimetic machine research

  Nagata, F., Otsuka, A., Sakakibara, K., Watanabe, K. & Habib, M. K., 2013, p. 2711-2717. 7 p.

  Research output: Contribution to conference › Paper › peer-review
  2 Citations (Scopus)

• Exploring fundamental physics far beyond standard model by high quality laser

  Yoshimura, M., 2020, p. 452-456. 5 p.

  Research output: Contribution to conference › Paper › peer-review

• Extension of heat transfer area using spiral carbon fibers

  Nakaso, K., Kang, H., Aoki, T. & Fukai, J., Dec 1 2009, p. nopagegiven.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• External and Internal interfacial turbulent shear layers

  Hunt, J., Ishihara, T., Eisma, J., Breugen, W. P., Westerweel, J. & Braza, M., Jan 1 2015.

  Research output: Contribution to conference › Paper › peer-review

• Fabrication of CaCO₃/SWNT nanocomposite using fullerodendron-assisted approach

  Sako, Y., Hayakawa, S., Takaguchi, Y. & Tsuboi, S., Dec 1 2006, p. 5093-5094. 2 p.

  Research output: Contribution to conference › Paper › peer-review

• Fabrication of field-effect transistor devices with new type of fullerodendron

  Sako, Y., Takaguchi, Y., Kusai, Y., Takayuki, N. & Yoshihiro, K., 2006, p. 1375. 1 p.

  Research output: Contribution to conference › Paper › peer-review

• Fabrication of hydroxyapatite nanocrystals/poly (lactic acid) composite for regenerative medicine

  Yanagida, H., Okada, M., Masuda, M., Ueki, M., Koyama, Y., Takakuda, K. & Furuzono, T., Oct 19 2006. 1 p.

  Research output: Contribution to conference › Paper › peer-review

• Fabrication of medical device from photoreactive particles having tissue-adhesion

  Okada, M., Masuda, M., Yasuda, S. & Furuzono, T., Oct 19 2006. 1 p.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• Fabrication of poly(p-oxycinnamoyl) needle crystals by using hydrodynamically induced crystallization during solution polymerization

  Muraoka, M., Yamazaki, S. & Kimura, K., Dec 1 2005. 1 p.

  Research output: Contribution to conference › Paper › peer-review

• Face Recognition by Parallel Partial Projections

  Sakaue, F. & Shakunaga, T., 2004, p. 144-150. 7 p.

  Research output: Contribution to conference › Paper › peer-review

• Fastest guidance with exerting acceleration to carrying objects kept less than starting slipping

  Okumura, K., Mukono, M., Minami, M., Yanou, A. & Deng, M., Dec 1 2010, p. 248-253. 6 p.

  Research output: Contribution to conference › Paper › peer-review

• Fault detection and isolation in automated controlled process based on equipment-reliability studies

  Ebrahimipour, V., Gabbar, H. A. & Suzuki, K., Dec 1 2005, p. 53-58. 6 p.

  Research output: Contribution to conference › Paper › peer-review

• FD-TD analysis for coaxial probe inserted into a waveguide

  Sanada, A., Sanagi, M., Nogi, S. & Yamane, K., Dec 1 1997, p. 957-960. 4 p.

  Research output: Contribution to conference › Paper › peer-review

• Feasible performance evaluations of 3-level 3-phase voltage source soft-switching inverter using IGBT modules

  Yamamoto, M., Yoshida, M., Honda, T., Iwamoto, H., Hiraki, E., Sugimoto, S., Kouno, I. & Nakaoka, M., Jan 1 1999, p. 1084-1089. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  2 Citations (Scopus)

• Femto-second profile moniitor using pulsed laser storage in an optical cavity

  Sakaue, K., Washio, M., Araki, S., Fukuda, M., Higashi, Y., Honda, Y., Taniguchi, T., Terunuma, N., Urakawa, J. & Sasao, N., 2009, p. 297-300. 4 p.

  Research output: Contribution to conference › Paper › peer-review

• Fiber-optic heterodyne interferometry temperature measurement of unburned gas in a HCCI engine fueled with DME

  Kawahara, N., Tomita, E. & Ichimiya, M., Dec 1 2002. 1 p.

  Research output: Contribution to conference › Paper › peer-review

• Fibre optic inclinometer sensor

  Schreck, M., Nishigaki, M. & Großwig, S., 2018.

  Research output: Contribution to conference › Paper › peer-review

• Field techniques for measuring soil hydraulic properties in unsaturated soils

  Takeshita, Y., 2019, p. 1-7. 7 p.

  Research output: Contribution to conference › Paper › peer-review

  Open Access

• Finding and quantitative evaluation of minute flaws on metal surface using hairline

  Zhu, J. & Minami, M., 2004, p. 1240-1245. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  3 Citations (Scopus)

• Fish catching experiments to overcome fish's intelligence by visual and prediction servoing in combination with chaos and random motions

  Mori, K., Ito, Y., Minami, M. & Yanou, A., 2013, p. 1316-1321. 6 p.

  Research output: Contribution to conference › Paper › peer-review

• Flame propagation and combustion characteristics of stratified charge propane-air mixture with swirling flow in a constant-volume vessel

  Nishiyama, A., Tomita, E., Kawahara, N., Yoshiyama, S. & Hamamoto, Y., Dec 1 2002. 1 p.

  Research output: Contribution to conference › Paper › peer-review

• Flexible and functional pectoral fin actuator for underwater robots

  Endo, S., Suzumori, K., Kanda, T., Kato, N., Suzuki, H. & Ando, Y., Dec 1 2005, p. 3838-3841. 4 p.

  Research output: Contribution to conference › Paper › peer-review

• Flexible rope manipulation by dual manipulator system using vision sensor

  Matsuno, T., Fukuda, T. & Arai, F., Jan 1 2001, p. 677-682. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  46 Citations (Scopus)

• Flight performance of the BESS-Polar aerogel cherenkov counter

  Hams, T., Abe, K., Fuke, H., Haino, S., Kim, K. C., Kumazawa, T., Lee, M. H., Makida, Y., Matsuda, S., Matsumoto, H., Matsumoto, K., Mitchell, J. W., Moiseev, A. A., Myers, Z. D., Nishimura, J., Nozaki, M., Ogata, A., Oikawa, M., Ormes, J. F., Sasaki, M., & 11 othersSeo, E. S., Shikaze, Y., Streitmatter, R. E., Suzuki, J., Takeuchi, K., Tanaka, K., Taniguchi, T., Yamagami, T., Yamamoto, A., Yoshida, T. & Yoshimura, K., 2005, p. 69-72. 4 p.

  Research output: Contribution to conference › Paper › peer-review
  2 Citations (Scopus)