Find Research outputs

Search results

• Paper

  Droplet diameter measurement near a nozzle exit of a gasoline DISI injector using PDA

  Kawahara, N., Mori, B. & Tomita, E., 2020.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• Droplet dispersion and turbulent structure in a pressure-atomized spray flame

  Kawahara, N., Ikeda, Y. & Nakajima, T., 1997.

  Research output: Contribution to conference › Paper › peer-review
  2 Citations (Scopus)

• Duty Cycle Controlled Soft Commutation High Frequency Inverter for Consumer Induction Cooker and Steamer

  Nishida, T., Moisseev, S., Hiraki, E. & Nakaoka, M., Dec 1 2003, p. 1846-1851. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  12 Citations (Scopus)

• Dynamically reconfigurable logic LSI - PCA-1

  Ito, H., Konishi, R., Nakada, H., Oguri, K., Nagoya, A., Imlig, N., Nagami, K., Shiozawa, T. & Inamori, M., Jan 1 2001, p. 103-106. 4 p.

  Research output: Contribution to conference › Paper › peer-review
  7 Citations (Scopus)

• Dynamic geometrical analysis of high-enstrophy structures in isotropic turbulence

  Hattori, Y. & Ishihara, T., Jan 1 2020.

  Research output: Contribution to conference › Paper › peer-review

• EDM characteristics of carbon fiber reinforced plastic

  Wang, H., Habib, S., Okada, A. & Uno, Y., Jan 1 2010, p. 65-68. 4 p.

  Research output: Contribution to conference › Paper › peer-review
  10 Citations (Scopus)

• Educational effects of creative thinking method in design project

  Tsukamoto, S., Ohashi, K., Washio, S., Torii, T. & Inoue, A., Dec 1 2005, p. 1055-1059. 5 p.

  Research output: Contribution to conference › Paper › peer-review

• Effective alignment between university education and teaching practice through automatic interpretation of lesson plans

  Kasai, T., Nagano, K. & Mizoguchi, R., Jan 1 2013, p. 163-165. 3 p.

  Research output: Contribution to conference › Paper › peer-review
  2 Citations (Scopus)

• Effectiveness of back and foot pressures for assessing drowsiness of drivers

  Murata, A., Nakatsuka, A. & Moriwaka, M., Jan 1 2013, p. 1754-1759. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  9 Citations (Scopus)

• Effectiveness of centrifuge-induced artificial gravity with ergometric exercise as a countermeasure during simulated microgravity exposure in humans

  Iwase, S., Fu, Q., Moritomo, E., Takada, H., Kamiya, A., Kawanokuchi, J., Shiozawa, T., Hirayanagi, K., Iwasaki, K., Yajima, K. & Mono, T., 2004, p. 1384-1391. 8 p.

  Research output: Contribution to conference › Paper › peer-review

• Effect of continuous diode laser on crack generation in pulsed Nd:YAG laser welding of aluminum alloy

  Miura, K., Okamoto, Y., Nakashiba, S. I., Sakagawa, T., Okada, A. & Uno, Y., Dec 1 2011.

  Research output: Contribution to conference › Paper › peer-review

• Effect of gaseous hydrogen on cyclic slip behavior around a stage i fatigue crack tip in an iron alloy

  Takahashi, Y., Sakamoto, J., Tanaka, M., Higashida, K. & Noguchi, H., Dec 1 2010.

  Research output: Contribution to conference › Paper › peer-review

• Effect of laser wavelength on machining characteristics of aluminum nitride in micro-boring

  Kataoka, N., Okamoto, Y., Uno, Y. & Tanino, I., 2006.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• Effect of map indication on remote control of a mobile robot

  Maeyama, S., Yuta, S., Igarashi, H. & Harada, A., 1999, p. 98-103. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  2 Citations (Scopus)

• Effect of nozzle geometry on atomization of transient spray from port fuel injector

  Esmail, M., Kawahara, N., Tomita, E. & Sumida, M., Dec 1 2008, p. 429-436. 8 p.

  Research output: Contribution to conference › Paper › peer-review
  2 Citations (Scopus)

• Effect of nozzle shape on dross generation in fine cutting of thin metal plate by pulsed Nd: YAG laser

  Suzuki, H., Okamoto, Y. & Uno, Y., Dec 1 2009.

  Research output: Contribution to conference › Paper › peer-review

• Effect of suction stress on strength characteristics of a compacted silty soil under low confining pressure

  Kato, S., Lohani, T. N., Kim, B. S. & Park, S. W., 2019, p. 46-51. 6 p.

  Research output: Contribution to conference › Paper › peer-review

  Open Access

• Effect of surface quality of brass coating wire on wire EDM characteristics

  Arizono, K., Yamauchi, T., Okada, A. & Uno, Y., Dec 1 2007.

  Research output: Contribution to conference › Paper › peer-review

• Effects of fuel composition on flame lift-off length and pollutant formation in dual-component fuel spray

  Okada, M., Shigetomi, D., Matsumoto, M., Kobashi, Y. & Senda, J., 2012, p. 323-328. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  7 Citations (Scopus)

• Effects of laser wavelength and intensity distribution on removal characteristics of TCO film

  Takahashi, N., Okamoto, Y., Nakashiba, S. I., Sakagawa, T., Okada, A. & Uno, Y., Dec 1 2011.

  Research output: Contribution to conference › Paper › peer-review

• Effects of organic molecules in the Kokubo's simulated body fluid on apatite formation on bioactive glass and titanium substrates

  Tsuru, K., Higashi, Y., Hayakawa, S. & Osaka, A., Dec 1 2003, p. 103-110. 8 p.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• Effects of pen holding posture on handwriting motion

  Murata, A. & Gotoh, K., Jan 1 2013, p. 1772-1777. 6 p.

  Research output: Contribution to conference › Paper › peer-review

• Effects of polarization direction on removal characteristics of Silver nanowire transparent conductive film by FS pulsed laser

  Shimose, T., Okamoto, Y., Oshita, M., Nishi, N., Shinonaga, T. & Okada, A., Nov 13 2017.

  Research output: Contribution to conference › Paper › peer-review

• Effects on proposed end-milling condition decision-support system using data mining on saving power consumption

  Kodama, H., Hirogaki, T., Aoyama, E., Ogawa, K. & Sakamoto, J., Dec 1 2011.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• Efficient hierarchical clustering method for the multiple constant multiplication problem

  Matsuura, A., Yukishita, M. & Nagoya, A., Jan 1 1997, p. 83-88. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  4 Citations (Scopus)

• Electromagnetic Noises and Efficiency Evaluations of Three-Phase ZVS-PWM Inverter with New Resonant AC Link Snubbers

  Yoshida, M., Fujii, Y., Hiraki, E. & Nakaoka, M., Dec 1 2003, p. 2911-2916. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  9 Citations (Scopus)

• Electro-oxidation of alcohols in N-oxyl-immobilized ionic liquids - Approach to a totally closed system

  Kuroboshi, M., Fujisawa, J. & Tanaka, H., Dec 1 2004, p. 161-164. 4 p.

  Research output: Contribution to conference › Paper › peer-review

• Emergence of adaptive behaviors by redundant robots - Robustness to changes environment and failures

  Ito, K. & Gofuku, A., 2003, p. 2572-2579. 8 p.

  Research output: Contribution to conference › Paper › peer-review
  4 Citations (Scopus)

• Empirical approach for estimating wetting path of soil water characteristic curve

  Park, H. S., Kim, B. S. & Park, S. W., 2020.

  Research output: Contribution to conference › Paper › peer-review

• Energy spectra of cosmic-ray hydrogen and helium isotopes during the 2000 solar maximum

  Kim, K. C., Abe, K., Fuke, H., Haino, S., Hams, T., Makida, Y., Matsuda, S., Mitchell, J. W., Moiseev, A. A., Nishimura, J., Nozaki, M., Orito, S., Ormes, J. F., Sanuki, T., Sasaki, M., Seo, E. S., Shikaze, Y., Streitmatter, R. E., Suzuki, J., Tanaka, K., & 4 othersYamagami, T., Yamamoto, A., Yoshida, T. & Yoshimura, K., 2007, p. 71-74. 4 p.

  Research output: Contribution to conference › Paper › peer-review
  4 Citations (Scopus)

• Ensemble heart rate extraction method for biological data from water pressure sensor

  Uwano, F. & Takadama, K., 2018, p. 304-309. 6 p.

  Research output: Contribution to conference › Paper › peer-review

• Estimation of Bidirectional Texture Functions from Bizen-ware Images

  Migita, T., Sekiguchi, M. & Shakunaga, T., 2005, p. 171-176. 6 p.

  Research output: Contribution to conference › Paper › peer-review

• Estimation of breast density on digital mammograms

  Tsujita, N., Goto, S., Azuma, Y., Sumimoto, T. & Kadohisa, S., 2005, p. 3350-3354. 5 p.

  Research output: Contribution to conference › Paper › peer-review

• Estimation of the digitized mammographic breast density by the histogram approach using the neural network

  Goto, S., Azuma, Y., Sumimoto, T., Takeda, Y. & Eiho, S., 2003.

  Research output: Contribution to conference › Paper › peer-review

• Estimation of Thermal Deformation of CNC Lathe Based on Measurement of Temperature Rise

  Otera, K., Onishi, T., Katayama, T., Shiraga, D., Akai, T., Suetake, T., Honda, K., Miyake, N. & Ohashi, K., 2021, p. 118-120. 3 p.

  Research output: Contribution to conference › Paper › peer-review

• Estimation of the shape error in the Long workpiece from the normal grinding force of cylindrical traverse grinding

  Sakamoto, K., Onishi, T., Sakakura, M., Kawaguchi, N. & Ohashi, K., 2018.

  Research output: Contribution to conference › Paper › peer-review
  2 Citations (Scopus)

• Estimation of turbulence-development by a multifractal theory

  Arimitsu, T., Arimitsu, N., Takechi, K., Kaneda, Y. & Ishihara, T., Jan 1 2020.

  Research output: Contribution to conference › Paper › peer-review

• Evaluating the Applicability of Reliability Prediction Models between Different Software

  Sato, S. I., Monden, A. & Matsumoto, K. I., 2002, p. 97-102. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  2 Citations (Scopus)

• Evaluation of capillary barrier system under lateral non-flow condition of sand layer

  Kim, B. S., Takeshita, Y., Park, S. W. & Kato, S., 2019.

  Research output: Contribution to conference › Paper › peer-review

• Evaluation of damaged region at the groove edge of TCO film in pulsed fiber laser processing

  Okamoto, Y., Takahashi, N., Nakashiba, S. I., Sakagawa, T. & Okada, A., 2012, p. 860-865. 6 p.

  Research output: Contribution to conference › Paper › peer-review

• Evaluation of drowsiness of driver based on change of sitting pressure center

  Murata, A., Urakami, Y., Koriyama, T., Ikeda, M. & Hayami, T., Jan 1 2013, p. 1760-1765. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  7 Citations (Scopus)

• Evaluation of expected damage costs for earth-fill breaches due to heavy rains by response surface method

  Nishimura, S. I., Shuku, T. & Shibata, T., 2020.

  Research output: Contribution to conference › Paper › peer-review

• Evaluation of mental fatigue in human-computer interaction - Analysis using feature parameters extracted from event-related potential

  Murata, A. & Uetake, A., Dec 1 2001, p. 630-635. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  8 Citations (Scopus)

• Evaluation of molten zone in glass welding using ultra-short pulsed laser

  Mohid, Z. B., Okamoto, Y., Yamamoto, K., Uno, Y., Miyamoto, I., Cvecek, K., Schmidt, M. & Bechtold, P., 2009.

  Research output: Contribution to conference › Paper › peer-review
  2 Citations (Scopus)

• Evaluation of non functional requirements in a request for proposal (RFP)

  Saito, Y., Monden, A. & Matsumoto, K., 2012, p. 106-111. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  6 Citations (Scopus)

• Evaluation of properties of a composite consisting of polymer and titanium dioxide controlled morphology

  Furuzono, T., Okada, M., Yamada, R., Iwasaki, M., Ito, S. & Sasaki, T., Dec 1 2005. 1 p.

  Research output: Contribution to conference › Paper › peer-review

• Evaluation of spark location distribution in wire EDM by high-speed observation

  Nakazawa, M., Okada, A., Yamauchi, T. & Uno, Y., Dec 1 2009.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• Evaluation of the spatial variability of cone penetration resistance inside an earth-fill dam composed of materials with different particle sizes with use of geostatistics

  Imaide, K., Nishimura, S., Shibata, T. & Shuku, T., 2020.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• Evaluation system of physical exercise ability using bio-electrical impedance

  Nakamura, T. & Yamamoto, Y., Jan 1 2001, p. 2053-2058. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  6 Citations (Scopus)

• Evolutionary head pose measurement by stereo model matching

  Song, W., Minami, M. & Mae, Y., 2005, p. 2871-2876. 6 p.

  Research output: Contribution to conference › Paper › peer-review